Fix Lenovo T14 Gen 1 failed to Boot After Update Windows 11

By
Fix Lenovo T14 Gen 1 failed to Boot After Update Windows 11

Just yesterday, I have failed to Boot my Lenovo T14 Gen 1. I tried to push power on button, but nothing happen within the display. When I plug in the charger, there is a sign of 3 fast blinking LED of Power Button. 

Then I tried to the reset button from the backside twice for 2 second each, After 3 hours for reset the the Lenovo T14 Gen 1 Finally, my laptop running again. 

If you have the same problem with your Lenovo T14 Gen 1, you might tried this way. If you failed, then you should try to reset it again and again if you have the same sign of 3 fast blinking LED power button as I have. 


Location: Indonesia

Comments

Post a Comment

Popular

MODBUS PIN Connection A8000

By
Image
MODBUS PIN Connection A8000 The Siemens SICAM A8000 series, specifically the CP-8000, CP-8021, and CP-8022 modules, support Modbus communication. However, they don't have dedicated physical Modbus ports with specific pin connections. Instead, Modbus communication is handled through the device's serial communication ports (RS-485 or RS-232), which are typically used for various communication protocols, including Modbus.      To configure Modbus communication on a SICAM A8000 device, you'll need to follow these general steps: Select the appropriate communication port: Choose the desired serial port (RS-485 or RS-232) based on your specific requirements and the capabilities of your Modbus master device. Configure the serial port parameters: Set the baud rate, parity, stop bits, and flow control settings to match the requirements of your Modbus master device. Enable Modbus communication: Activate Modbus communication on the selected serial port and configure the necess...
Read more

TL-MR6400 Performance with by U Signal 4G 25%

By
Image
TL-MR6400 Performance with by U Signal 4G 1 Bar 25% I have been using TL-MR6400 for about 1 year, and this is the signal quality in my village. Using by. U SIM Card, I have a 25% strength signal. Let's say this is a good sign performance of the TL-MR6400, I am still using it while posting this article.  While it is raining, that is the down performance caused by the signal drop. Actually, I have manually set the band frequency for a stable connection.  Update 12/29/2024: Using IM3 Card, I get 25% signal.
Read more

BAFO USB-RS232 Converter Driver Download All OS

By
Image
Image Source: Blibli BAFO USB-RS232 Converter Driver Download All OS A USB-RS232 converter is a device that allows you to connect a device or peripheral that uses a RS232 serial interface to a computer that only has USB ports. RS232 is a standard communication protocol used for serial communication between two devices. The converter consists of a USB connector on one end and an RS232 connector on the other end. The USB connector is plugged into a USB port on the computer, while the RS232 connector is connected to the serial port on the device or peripheral. The converter translates the signals between the two interfaces, allowing communication between the device and the computer. USB-RS232 converters are commonly used in industrial settings where older equipment still uses the RS232 interface, but newer computers only have USB ports. They can also be used with legacy devices such as modems, printers, and barcode scanners. When selecting a USB-RS232 converter, it's important to ens...
Read more

The difference between IEC 101 vs IEC 104 Protocol Communication

By
Image
The difference between IEC 101 vs IEC 104 Communication Protocol IEC 101 and IEC 104 are protocols used for communication between Supervisory Control and Data Acquisition ( SCADA ) systems and Remote Terminal Units (RTUs). However, they differ in several key aspects. Here is the general key between the two types of protocol: IEC 60870-5-101 Cyclic data transfer: IEC 101 uses a cyclic data transfer mechanism, meaning the master (SCADA) periodically polls the slaves (RTUs) for data. Limited security: IEC 101 has limited security features, making it vulnerable to attacks. Older protocol: IEC 101 is an older protocol, developed in the 1970s. IEC 60870-5-104 Event-driven data transfer: IEC 104 uses an event-driven data transfer mechanism, meaning data is only transferred when there is a change in the status of the remote equipment. Enhanced security: IEC 104 has enhanced security features, including encryption and authentication. Modern protocol: IEC 104 is a more modern protocol, develop...
Read more

RTU means Remote Terminal Unit

By
Image
Remote Terminal Unit RTU stands for Remote Terminal Unit, which is a type of electronic device used in industrial control systems and other applications to monitor and control remote equipment. RTUs are commonly used in industries such as oil and gas, power generation and distribution, and water treatment. An RTU typically consists of a microprocessor-based unit that interfaces with sensors, actuators, and other devices, and communicates with a central control system or other RTUs over a network. The RTU may be located at a remote site or distributed across multiple sites, and is designed to operate in harsh environments and under varying conditions. The functions of an RTU can include data acquisition, control and monitoring of equipment, alarm and event reporting, and communication with other devices and systems. RTUs are typically designed to be configurable and programmable, allowing them to be adapted to different applications and scenarios. Remote Terminal Unit (RTU) is a type of...
Read more

How to Fix Java Error when installing DS Agile Studio: Update

By
Image
How to Fix Java Error when installing DS Agile Studio: Update How to Fix Java Error when installing DS Agile Studio (DSAS1.2.0.0.34799) I tried to manually install this java installer  jre-6u25-windows-i586 to fix the problem with the offline editor of the MCP Studio 1.2 I am using Windows 10 Pro on my pc, and I realized that it might occur because Java is not supported in Microsoft Edge.  The other way, you might need to try to reset your Windows 10 PC date, As you can see, that's the certificate for 2019, then you can try to reset your pc time into 2018.  Update: Just a few days ago, my friend asked me about this trouble, he is struggling to install SGConfig, Then I tried to help him. Here is the overall progress: I tried to install DS Agile Studio first, then open the project. After that, I can open the project in SGConfig Software to configure D400 RTU GE.  
Read more