BAFO USB-RS232 Converter Driver Download All OS
![]() |
Image Source: Blibli |
BAFO USB-RS232 Converter Driver Download All OS
A USB-RS232 converter is a device that allows you to connect a device or peripheral that uses a RS232 serial interface to a computer that only has USB ports. RS232 is a standard communication protocol used for serial communication between two devices.
The converter consists of a USB connector on one end and an RS232 connector on the other end. The USB connector is plugged into a USB port on the computer, while the RS232 connector is connected to the serial port on the device or peripheral. The converter translates the signals between the two interfaces, allowing communication between the device and the computer.
USB-RS232 converters are commonly used in industrial settings where older equipment still uses the RS232 interface, but newer computers only have USB ports. They can also be used with legacy devices such as modems, printers, and barcode scanners.
When selecting a USB-RS232 converter, it's important to ensure that it's compatible with both the computer's operating system and the device or peripheral that it will be used with. Drivers may need to be installed on the computer to allow it to recognize and communicate with the converter.
The new laptop does not come with RS 232 port, so you might need to buy a converter from USB to RS232. If you have the converter but don't have the driver, you can use this link to download BAFO USB-RS232 Converter Driver.
Here is the driver from BAFO Official: BF-810 Driver
Comments